seatpost- S311
The S311 is a powered by a built in, non-removable, rechargeable battery. This is a product that is charged with the included 2m long charging cable.
StVZO version available in Germany, only continuous mode is provided. S311 has the top two lenses protrude, a side view is always provided for safety. The StVZO version restricts the minimum insertion position so that the mechanical stopper does not go down any further as the top three lenses must always be exposed.
Features
Patented seatpost with an integrated seat rail clamp. The seatpost tube features 5 holes in which the LEDs are enclosed. The USB 2.0 charging port is located in the lower section of the seat rail clamp. The port is accessible from the outside and can be closed using a transparent silicone cover.
ETC
| K-number | K-1595 |
| Seatpost test standard | ISO 4210 City, Mountain |
| Compliant with standard or directive | CE, RoHS, UN3481, StVZO §22a TA Nr.14b (Rear lights for bicycles), IPX5 |
| Package Contents | Rear light seatpost, USB charge cable (200cm) |
Function
The second top LED functions as a button and is used to operate the rear light.
Light modes : Off → 5 LEDs → 3 LEDs → Long press to switch off
Light unit
| Lens Type | Protruding |
| Light Module | 2 wide angle red LEDs, 3 high brightness red LEDs |
| Brightness | 12 cd |
| Power source | Lithium-polymer battery 3.7V, 800mAh, 801473 with protection. |
| Light Duration (fully charged battery) | 5 LED : 10 hours 3 LED : 15 hours |
| Charging Time | 2.5 h |
Charge state
| Low battery alert | Indicated by a blue LED integrated into the micro-USB port. As soon as this LED lights up, the battery still has enough capacity to power the LEDs for 1 more hour in accordance with the regulation. The micro-USB port is covered with a transparent silicone cap so that the blue LED is visible. |
| Charging | Micro-USB 2.0 port integrated in the seat rail clamp with a transparent silicone cover for splash-water protection.
Charging voltage: 5V Charging current: 0.5A – 2.0A In order to reach the full load capacity, it takes about 2.5 hours. During charging, the first led flashes in RED. The flashing stops, changes to continuous red light on when the battery is completely charged. When the battery is fully charged, remove the cable from the USB port. Should the product become excessively hot during charging, stop the charging process. Never charge the battery when the USB port is wet. Full charge and discharge cycles 500. |
| Charging time | 2.5 hours |
| Shipping Weight 27.2 – 350L 30.9 – 350L 30.9 – 400L 31.6 – 350L |
0.66kg |
| Shipping Diameter | 430*65*80 |
| Operating Temperature | Min : -15° C Max : 45° C Optimum storage temperature : 20-25°C |
Reviews
There are no reviews yet.